Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

DELL

DELL 36Rh9 1.2 Tb 10K 2.5" SAS internal hard drive

SKU CH-KH6W-J7D22

A 1.2 Tb 2.5 inch SAS hard drive spinning at 10K rpm for fast desktop storage

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Dell 36Rh9 1.2 Tb SAS Drive

The Dell 36Rh9 is a new 1.2 Tb mechanical hard disk with a 2.5 inch form factor and a 10K spindle speed. It connects via a 6Gb/s SAS interface and is a genuine Dell part intended for internal desktop use. Installation is recommended for experienced technicians.

Who This Suits And Who It Does Not

This drive suits systems that accept a 2.5 inch SAS hard disk running at 10K rpm with a 6Gb/s external transfer rate. It will not suit builds that require a 15000 rpm spindle speed or a different capacity such as 300 Gb.

The Spec That Decides Fit

The 6Gb/s SAS interface is the single specification that determines whether this drive will work in your system; the controller and backplane must support SAS at that transfer rate.

Priekšrocības

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Does the 2.5-inch SAS drive need a 3.5-inch adapter bracket to fit my server bay?

The drive uses a 2.5-inch form factor, so a 3.5-inch adapter bracket is required if the bay only accepts 3.5-inch drives.

Can the 6 Gb/s SAS interface work with an existing 3 Gb/s SAS backplane?

The 6 Gb/s SAS interface is backward compatible and will operate at 3 Gb/s on a 3 Gb/s backplane.

How can I confirm the drive is recognised at its full 1.2 Tb capacity after installation?

Check the RAID controller BIOS or operating system disk utility; it should report approximately 1.2 Tb of usable space.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.