Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

DELL

DELL 36Rh9 1.2 Tb 10K 2.5" SAS internal hard drive

SKU CH-KH6W-J7D22

A 1.2 Tb 2.5 inch SAS hard drive spinning at 10K rpm for fast desktop storage

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Dell 36Rh9 1.2 Tb SAS Drive

The Dell 36Rh9 is a new 1.2 Tb mechanical hard disk with a 2.5 inch form factor and a 10K spindle speed. It connects via a 6Gb/s SAS interface and is a genuine Dell part intended for internal desktop use. Installation is recommended for experienced technicians.

Who This Suits And Who It Does Not

This drive suits systems that accept a 2.5 inch SAS hard disk running at 10K rpm with a 6Gb/s external transfer rate. It will not suit builds that require a 15000 rpm spindle speed or a different capacity such as 300 Gb.

The Spec That Decides Fit

The 6Gb/s SAS interface is the single specification that determines whether this drive will work in your system; the controller and backplane must support SAS at that transfer rate.

I korthet

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Does the 2.5-inch SAS drive need a 3.5-inch adapter bracket to fit my server bay?

The drive uses a 2.5-inch form factor, so a 3.5-inch adapter bracket is required if the bay only accepts 3.5-inch drives.

Can the 6 Gb/s SAS interface work with an existing 3 Gb/s SAS backplane?

The 6 Gb/s SAS interface is backward compatible and will operate at 3 Gb/s on a 3 Gb/s backplane.

How can I confirm the drive is recognised at its full 1.2 Tb capacity after installation?

Check the RAID controller BIOS or operating system disk utility; it should report approximately 1.2 Tb of usable space.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.