Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

DELL

DELL 36Rh9 1.2 Tb 10K 2.5" SAS internal hard drive

SKU CH-KH6W-J7D22

A 1.2 Tb 2.5 inch SAS hard drive spinning at 10K rpm for fast desktop storage

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Dell 36Rh9 1.2 Tb SAS Drive

The Dell 36Rh9 is a new 1.2 Tb mechanical hard disk with a 2.5 inch form factor and a 10K spindle speed. It connects via a 6Gb/s SAS interface and is a genuine Dell part intended for internal desktop use. Installation is recommended for experienced technicians.

Who This Suits And Who It Does Not

This drive suits systems that accept a 2.5 inch SAS hard disk running at 10K rpm with a 6Gb/s external transfer rate. It will not suit builds that require a 15000 rpm spindle speed or a different capacity such as 300 Gb.

The Spec That Decides Fit

The 6Gb/s SAS interface is the single specification that determines whether this drive will work in your system; the controller and backplane must support SAS at that transfer rate.

Puncte forte

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Does the 2.5-inch SAS drive need a 3.5-inch adapter bracket to fit my server bay?

The drive uses a 2.5-inch form factor, so a 3.5-inch adapter bracket is required if the bay only accepts 3.5-inch drives.

Can the 6 Gb/s SAS interface work with an existing 3 Gb/s SAS backplane?

The 6 Gb/s SAS interface is backward compatible and will operate at 3 Gb/s on a 3 Gb/s backplane.

How can I confirm the drive is recognised at its full 1.2 Tb capacity after installation?

Check the RAID controller BIOS or operating system disk utility; it should report approximately 1.2 Tb of usable space.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.