We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive with green circuit board visible

DELL

DELL 36Rh9 1.2 Tb 10K 2.5" SAS internal hard drive

SKU CH-KH6W-J7D22

A 1.2 Tb 2.5 inch SAS hard drive spinning at 10K rpm for fast desktop storage

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Dell 36Rh9 1.2 Tb SAS Drive

The Dell 36Rh9 is a new 1.2 Tb mechanical hard disk with a 2.5 inch form factor and a 10K spindle speed. It connects via a 6Gb/s SAS interface and is a genuine Dell part intended for internal desktop use. Installation is recommended for experienced technicians.

Who This Suits And Who It Does Not

This drive suits systems that accept a 2.5 inch SAS hard disk running at 10K rpm with a 6Gb/s external transfer rate. It will not suit builds that require a 15000 rpm spindle speed or a different capacity such as 300 Gb.

The Spec That Decides Fit

The 6Gb/s SAS interface is the single specification that determines whether this drive will work in your system; the controller and backplane must support SAS at that transfer rate.

Highlights

  • 2 Tb capacity stores large datasets
  • 10K rpm spindle speeds up data access
  • SAS 6Gb/s interface connects to compatible controllers
  • 5 inch form factor fits dense server bays
  • Genuine Dell part ensures system compatibility

Specifications

No published specifications for this item yet.

Questions about this item

Does the 2.5-inch SAS drive need a 3.5-inch adapter bracket to fit my server bay?

The drive uses a 2.5-inch form factor, so a 3.5-inch adapter bracket is required if the bay only accepts 3.5-inch drives.

Can the 6 Gb/s SAS interface work with an existing 3 Gb/s SAS backplane?

The 6 Gb/s SAS interface is backward compatible and will operate at 3 Gb/s on a 3 Gb/s backplane.

How can I confirm the drive is recognised at its full 1.2 Tb capacity after installation?

Check the RAID controller BIOS or operating system disk utility; it should report approximately 1.2 Tb of usable space.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.