Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Gray aluminum dual-bay M.2 enclosure with slide trays and USB-C port

iDsonix

iDsonix M.2 Dual-Bay SATA+NVMe Enclosure USB3.1 Gen2 10Gbps

SKU CH-NXE1-ERGGA MPN M.2

Dual-bay aluminum enclosure holds M.2 2230, 2242, 2260 and 2280 SSDs with SATA and NVMe support over USB 3.1 Gen 2 at 10 Gbps

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • HDD Count SupportedDual HDD

Model M.2 SATA&NVMe SSD

  • Tool-free slide rail speeds up SSD installation
  • One-piece aluminium body dissipates heat without a fan
  • USB 3.1 Gen2 Type-C delivers up to 10 Gbps with UASP
  • Supports M.2 2230, 2242, 2260 and 2280 in SATA or NVMe
  • Auto sleep after 10 idle minutes saves power and extends drive life

Dual-bay SATA and NVMe enclosure

This iDsonix enclosure holds two M.2 solid-state drives simultaneously. One bay accepts SATA protocol drives and the other accepts NVMe protocol drives. A USB 3.1 Gen 2 Type-C port delivers up to 10 Gbps bandwidth with UASP acceleration. The aluminium body uses a tool-free slide rail for quick drive swaps. Compatible lengths are 2230, 2242, 2260 and 2280.

Suits users needing both protocols on one cable

Buyers who want to access a SATA M.2 drive and an NVMe M.2 drive from a single USB connection will benefit. The enclosure also works with PCs, laptops, smart TVs, routers and a PS4. It does not suit anyone who needs to run two NVMe drives at the same time or two SATA drives at the same time. It also lacks a built-in display or hardware RAID function.

Check host port and drive keying before ordering

Verify that your computer or device provides a USB Type-C or USB-A port capable of 10 Gbps operation to reach the rated speed. Confirm each M.2 module matches the supported lengths and uses the correct B-key or M-key for its protocol. The included cable supports 60 W Power Delivery, so the host must supply enough power for both drives.

Priekšrocības

  • Tool-free slide rail speeds up SSD installation
  • One-piece aluminium body dissipates heat without a fan
  • USB 3.1 Gen2 Type-C delivers up to 10 Gbps with UASP
  • Supports M.2 2230, 2242, 2260 and 2280 in SATA or NVMe
  • Auto sleep after 10 idle minutes saves power and extends drive life

Specifikācijas

ColorGray
TypeEnclosure
MaterialAluminum
HDD Count SupportedDual HDD

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What host port and cable do I need to reach the 10 Gbps link speed with this enclosure?

Use a USB 3.1 Gen 2 Type-C port on the host and the included Type-C to Type-C or Type-C to USB-A cable, both rated for 10 Gbps.

Can I run a SATA M.2 drive in one bay and an NVMe M.2 drive in the other at the same time?

Yes, the dual-bay design supports SATA and NVMe protocols simultaneously across the two slots.

How do I confirm both drives are active and the enclosure is working correctly after setup?

The LED indicator shows power and access status for each bay; drives should appear in the OS device manager or disk utility with expected capacities.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.