Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

iDsonix

iDsonix M.2 Dual-Bay SATA+NVMe Enclosure USB3.1 Gen2 10Gbps

SKU CH-NXE1-ERGGA MPN M.2

Dual-bay aluminum enclosure holds M.2 2230, 2242, 2260 and 2280 SSDs with SATA and NVMe support over USB 3.1 Gen 2 at 10 Gbps

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • HDD Count SupportedDual HDD

Model M.2 SATA&NVMe SSD

  • Tool-free slide rail speeds up SSD installation
  • One-piece aluminium body dissipates heat without a fan
  • USB 3.1 Gen2 Type-C delivers up to 10 Gbps with UASP
  • Supports M.2 2230, 2242, 2260 and 2280 in SATA or NVMe
  • Auto sleep after 10 idle minutes saves power and extends drive life

Dual-bay SATA and NVMe enclosure

This iDsonix enclosure holds two M.2 solid-state drives simultaneously. One bay accepts SATA protocol drives and the other accepts NVMe protocol drives. A USB 3.1 Gen 2 Type-C port delivers up to 10 Gbps bandwidth with UASP acceleration. The aluminium body uses a tool-free slide rail for quick drive swaps. Compatible lengths are 2230, 2242, 2260 and 2280.

Suits users needing both protocols on one cable

Buyers who want to access a SATA M.2 drive and an NVMe M.2 drive from a single USB connection will benefit. The enclosure also works with PCs, laptops, smart TVs, routers and a PS4. It does not suit anyone who needs to run two NVMe drives at the same time or two SATA drives at the same time. It also lacks a built-in display or hardware RAID function.

Check host port and drive keying before ordering

Verify that your computer or device provides a USB Type-C or USB-A port capable of 10 Gbps operation to reach the rated speed. Confirm each M.2 module matches the supported lengths and uses the correct B-key or M-key for its protocol. The included cable supports 60 W Power Delivery, so the host must supply enough power for both drives.

Helstu kostir

  • Tool-free slide rail speeds up SSD installation
  • One-piece aluminium body dissipates heat without a fan
  • USB 3.1 Gen2 Type-C delivers up to 10 Gbps with UASP
  • Supports M.2 2230, 2242, 2260 and 2280 in SATA or NVMe
  • Auto sleep after 10 idle minutes saves power and extends drive life

Tæknilýsing

ColorGray
TypeEnclosure
MaterialAluminum
HDD Count SupportedDual HDD

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What host port and cable do I need to reach the 10 Gbps link speed with this enclosure?

Use a USB 3.1 Gen 2 Type-C port on the host and the included Type-C to Type-C or Type-C to USB-A cable, both rated for 10 Gbps.

Can I run a SATA M.2 drive in one bay and an NVMe M.2 drive in the other at the same time?

Yes, the dual-bay design supports SATA and NVMe protocols simultaneously across the two slots.

How do I confirm both drives are active and the enclosure is working correctly after setup?

The LED indicator shows power and access status for each bay; drives should appear in the OS device manager or disk utility with expected capacities.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.