Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gray aluminum dual-bay M.2 enclosure with slide trays and USB-C port

iDsonix

iDsonix M.2 Dual-Bay SATA+NVMe Enclosure USB3.1 Gen2 10Gbps

SKU CH-NXE1-ERGGA MPN M.2

Dual-bay aluminum enclosure holds M.2 2230, 2242, 2260 and 2280 SSDs with SATA and NVMe support over USB 3.1 Gen 2 at 10 Gbps

  • ColorGray
  • TypeEnclosure
  • MaterialAluminum
  • HDD Count SupportedDual HDD

Model M.2 SATA&NVMe SSD

  • Tool-free slide rail speeds up SSD installation
  • One-piece aluminium body dissipates heat without a fan
  • USB 3.1 Gen2 Type-C delivers up to 10 Gbps with UASP
  • Supports M.2 2230, 2242, 2260 and 2280 in SATA or NVMe
  • Auto sleep after 10 idle minutes saves power and extends drive life

Dual-bay SATA and NVMe enclosure

This iDsonix enclosure holds two M.2 solid-state drives simultaneously. One bay accepts SATA protocol drives and the other accepts NVMe protocol drives. A USB 3.1 Gen 2 Type-C port delivers up to 10 Gbps bandwidth with UASP acceleration. The aluminium body uses a tool-free slide rail for quick drive swaps. Compatible lengths are 2230, 2242, 2260 and 2280.

Suits users needing both protocols on one cable

Buyers who want to access a SATA M.2 drive and an NVMe M.2 drive from a single USB connection will benefit. The enclosure also works with PCs, laptops, smart TVs, routers and a PS4. It does not suit anyone who needs to run two NVMe drives at the same time or two SATA drives at the same time. It also lacks a built-in display or hardware RAID function.

Check host port and drive keying before ordering

Verify that your computer or device provides a USB Type-C or USB-A port capable of 10 Gbps operation to reach the rated speed. Confirm each M.2 module matches the supported lengths and uses the correct B-key or M-key for its protocol. The included cable supports 60 W Power Delivery, so the host must supply enough power for both drives.

Kohokohdat

  • Tool-free slide rail speeds up SSD installation
  • One-piece aluminium body dissipates heat without a fan
  • USB 3.1 Gen2 Type-C delivers up to 10 Gbps with UASP
  • Supports M.2 2230, 2242, 2260 and 2280 in SATA or NVMe
  • Auto sleep after 10 idle minutes saves power and extends drive life

Tekniset tiedot

ColorGray
TypeEnclosure
MaterialAluminum
HDD Count SupportedDual HDD

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What host port and cable do I need to reach the 10 Gbps link speed with this enclosure?

Use a USB 3.1 Gen 2 Type-C port on the host and the included Type-C to Type-C or Type-C to USB-A cable, both rated for 10 Gbps.

Can I run a SATA M.2 drive in one bay and an NVMe M.2 drive in the other at the same time?

Yes, the dual-bay design supports SATA and NVMe protocols simultaneously across the two slots.

How do I confirm both drives are active and the enclosure is working correctly after setup?

The LED indicator shows power and access status for each bay; drives should appear in the OS device manager or disk utility with expected capacities.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.