Intel DC S3710 SSDSC2BA200G401 2.5" 200GB SATA enterprise SSD
- 2.5"
- 200GB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Intel
Enterprise 2.5" SATA SSD with 1.2TB MLC capacity, 550 MB/s read, 520 MB/s write and AES 256-bit encryption
The Intel DC S3710 SSDSC2BA012T401 is a 2.5-inch enterprise solid-state drive with a 1.2TB capacity. It uses a SATA III interface and MLC memory components for consistent performance in server and storage arrays. The drive is suited for read-intensive workloads requiring high endurance and data integrity.
This drive replaces mechanical hard drives or lower-endurance SSDs in 2.5-inch SATA bays. The jump is worth it when workloads demand up to 550 MBps sequential reads, 520 MBps sequential writes, and 85,000 random read IOPS with a 2,000,000-hour MTBF. It adds AES 256-bit hardware encryption and enhanced power-loss data protection.
The SATA III interface caps maximum throughput at 6 Gbps, limiting sequential speeds to the rated 550 MBps read and 520 MBps write. Random write performance tops out at 45,000 IOPS. Latency sits at 55 µs read and 66 µs write. Active power draw reaches 6.9W within a 0°C to 70°C operating range.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA012T401 |
| Form Factor | 2.5" |
| Capacity | 1.2TB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 520 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 45,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 6.9W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G / 0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 94g |
| Sūtījuma svars | 0.45 kg |
| Sūtījuma izmēri | 178 × 152 × 51 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The drive uses a standard 2.5-inch form factor with SATA connectors, matching common server and laptop bays designed for this size.
Connect the SATA data and power cables, secure the drive in the bay, then enable AHCI mode in the system BIOS so the SATA III interface operates at full speed.
With a 2,000,000-hour MTBF and high-endurance MLC NAND, the SSD is rated for years of continuous operation; monitor SMART attributes for media wear or reallocated sectors to plan replacement.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?