Intel DC S3710 SSDSC2BA400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Intel
2.5-inch SATA enterprise SSD with MLC NAND delivering 550 MB/s sequential read, 300 MB/s sequential write, 85,000 random read IOPS and 43,000 random write IOPS
The Intel DC S3710 is a 2.5-inch SATA solid-state drive built for enterprise workloads. It uses MLC NAND and delivers sequential reads up to 550 MBps and writes up to 300 MBps. Random 4KB performance reaches 85,000 read IOPS and 43,000 write IOPS. The drive includes AES 256-bit encryption and enhanced power-loss data protection.
This drive fits servers that demand consistent low latency and high endurance, with a 2 million-hour MTBF and power-loss protection. Read latency is 55 µs and write latency is 66 µs. Active power draw is 4W. Buyers who need more than 200GB of storage should look at larger-capacity models.
The single specification that determines suitability is the 200GB capacity. It sets the total addressable space for the operating system, applications, and active data sets. Verify that this capacity meets the storage requirement before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA200G401 |
| Part Number | SSDSC2BA200G4 |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 300 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 43,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 4W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G/0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g |
| Sūtījuma svars | 0.10 kg |
| Sūtījuma izmēri | 152 × 109 × 22 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The 2.5 inch form factor fits standard bays and the SATA III interface connects with any standard SATA data and power cable.
Yes, the SATA III interface is backward compatible with SATA II and SATA I ports, so it will operate alongside older drives on the same controller.
Run a 4KB random read benchmark across the full 200GB span; sustained results near 85,000 IOPS confirm the drive is performing to specification.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?