Intel DC S3710 SSDSC2BA400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Intel
2.5-inch SATA enterprise SSD with MLC NAND delivering 550 MB/s sequential read, 300 MB/s sequential write, 85,000 random read IOPS and 43,000 random write IOPS
The Intel DC S3710 is a 2.5-inch SATA solid-state drive built for enterprise workloads. It uses MLC NAND and delivers sequential reads up to 550 MBps and writes up to 300 MBps. Random 4KB performance reaches 85,000 read IOPS and 43,000 write IOPS. The drive includes AES 256-bit encryption and enhanced power-loss data protection.
This drive fits servers that demand consistent low latency and high endurance, with a 2 million-hour MTBF and power-loss protection. Read latency is 55 µs and write latency is 66 µs. Active power draw is 4W. Buyers who need more than 200GB of storage should look at larger-capacity models.
The single specification that determines suitability is the 200GB capacity. It sets the total addressable space for the operating system, applications, and active data sets. Verify that this capacity meets the storage requirement before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA200G401 |
| Part Number | SSDSC2BA200G4 |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 300 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 43,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 4W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G/0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g |
| Tarnekaal | 0.10 kg |
| Pakendi mõõtmed | 152 × 109 × 22 mm |
Selle mudeli teised versioonid
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
The 2.5 inch form factor fits standard bays and the SATA III interface connects with any standard SATA data and power cable.
Yes, the SATA III interface is backward compatible with SATA II and SATA I ports, so it will operate alongside older drives on the same controller.
Run a 4KB random read benchmark across the full 200GB span; sustained results near 85,000 IOPS confirm the drive is performing to specification.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?