Intel DC S3710 SSDSC2BA400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Intel
2.5-inch SATA enterprise SSD with MLC NAND delivering 550 MB/s sequential read, 300 MB/s sequential write, 85,000 random read IOPS and 43,000 random write IOPS
The Intel DC S3710 is a 2.5-inch SATA solid-state drive built for enterprise workloads. It uses MLC NAND and delivers sequential reads up to 550 MBps and writes up to 300 MBps. Random 4KB performance reaches 85,000 read IOPS and 43,000 write IOPS. The drive includes AES 256-bit encryption and enhanced power-loss data protection.
This drive fits servers that demand consistent low latency and high endurance, with a 2 million-hour MTBF and power-loss protection. Read latency is 55 µs and write latency is 66 µs. Active power draw is 4W. Buyers who need more than 200GB of storage should look at larger-capacity models.
The single specification that determines suitability is the 200GB capacity. It sets the total addressable space for the operating system, applications, and active data sets. Verify that this capacity meets the storage requirement before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA200G401 |
| Part Number | SSDSC2BA200G4 |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 300 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 43,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 4W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G/0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g |
| Sendingarþyngd | 0.10 kg |
| Stærð sendingar | 152 × 109 × 22 mm |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The 2.5 inch form factor fits standard bays and the SATA III interface connects with any standard SATA data and power cable.
Yes, the SATA III interface is backward compatible with SATA II and SATA I ports, so it will operate alongside older drives on the same controller.
Run a 4KB random read benchmark across the full 200GB span; sustained results near 85,000 IOPS confirm the drive is performing to specification.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?