Intel DC S3710 SSDSC2BA400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Intel
2.5-inch SATA enterprise SSD with MLC NAND delivering 550 MB/s sequential read, 300 MB/s sequential write, 85,000 random read IOPS and 43,000 random write IOPS
The Intel DC S3710 is a 2.5-inch SATA solid-state drive built for enterprise workloads. It uses MLC NAND and delivers sequential reads up to 550 MBps and writes up to 300 MBps. Random 4KB performance reaches 85,000 read IOPS and 43,000 write IOPS. The drive includes AES 256-bit encryption and enhanced power-loss data protection.
This drive fits servers that demand consistent low latency and high endurance, with a 2 million-hour MTBF and power-loss protection. Read latency is 55 µs and write latency is 66 µs. Active power draw is 4W. Buyers who need more than 200GB of storage should look at larger-capacity models.
The single specification that determines suitability is the 200GB capacity. It sets the total addressable space for the operating system, applications, and active data sets. Verify that this capacity meets the storage requirement before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA200G401 |
| Part Number | SSDSC2BA200G4 |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 300 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 43,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 4W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G/0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g |
| Prepravná hmotnosť | 0.10 kg |
| Rozmery balenia | 152 × 109 × 22 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The 2.5 inch form factor fits standard bays and the SATA III interface connects with any standard SATA data and power cable.
Yes, the SATA III interface is backward compatible with SATA II and SATA I ports, so it will operate alongside older drives on the same controller.
Run a 4KB random read benchmark across the full 200GB span; sustained results near 85,000 IOPS confirm the drive is performing to specification.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?