Intel DC S3710 SSDSC2BA400G401 2.5" 400GB SATA enterprise SSD
- 2.5"
- 400GB
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Intel
2.5-inch SATA enterprise SSD with MLC NAND delivering 550 MB/s sequential read, 300 MB/s sequential write, 85,000 random read IOPS and 43,000 random write IOPS
The Intel DC S3710 is a 2.5-inch SATA solid-state drive built for enterprise workloads. It uses MLC NAND and delivers sequential reads up to 550 MBps and writes up to 300 MBps. Random 4KB performance reaches 85,000 read IOPS and 43,000 write IOPS. The drive includes AES 256-bit encryption and enhanced power-loss data protection.
This drive fits servers that demand consistent low latency and high endurance, with a 2 million-hour MTBF and power-loss protection. Read latency is 55 µs and write latency is 66 µs. Active power draw is 4W. Buyers who need more than 200GB of storage should look at larger-capacity models.
The single specification that determines suitability is the 200GB capacity. It sets the total addressable space for the operating system, applications, and active data sets. Verify that this capacity meets the storage requirement before purchase.
| Brand | Intel |
|---|---|
| Series | DC S3710 |
| Model | SSDSC2BA200G401 |
| Part Number | SSDSC2BA200G4 |
| Form Factor | 2.5" |
| Capacity | 200GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | Up to 550 MBps |
| Max Sequential Write | Up to 300 MBps |
| 4KB Random Read | Up to 85,000 IOPS |
| 4KB Random Write | Up to 43,000 IOPS |
| Read Latency | 55 µs |
| Write Latency | 66 µs |
| MTBF | 2,000,000 hours |
| Features | Lithography Type: 20 nm Enhanced Power Loss Data Protection Hardware Encryption: AES 256 bit High Endurance Technology (HET) Temperature Monitoring and Logging End-to-End Data Protection |
| Power Consumption (Idle) | 0.6W |
| Power Consumption (Active) | 4W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000 G/0.5ms |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Non-Operating: 3.13 GRMS (5 - 800 Hz) |
| Height | 7.00mm |
| Weight | 82g |
| Fraktvikt | 0.10 kg |
| Paketstorlek | 152 × 109 × 22 mm |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
The 2.5 inch form factor fits standard bays and the SATA III interface connects with any standard SATA data and power cable.
Yes, the SATA III interface is backward compatible with SATA II and SATA I ports, so it will operate alongside older drives on the same controller.
Run a 4KB random read benchmark across the full 200GB span; sustained results near 85,000 IOPS confirm the drive is performing to specification.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?