Jungle Leopard Interstellar V2 RS 120mm Case Fan Infinity Mirror Module Daisy-Chain ARGB Triple Pack White
- 3 Fans
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Jungle Leopard
Three 120 mm hydraulic-bearing fans deliver 68 CFM each at up to 1850 RPM while staying below 32 dB(A), and daisy-chain ARGB cables with an infinity-mirror ring keep cabling tidy
Color Black-Reverse
The Jungle Leopard Interstellar V2 triple pack delivers three 120 mm case fans in a single box. Each unit uses a hydraulic bearing and a 4-pin power connector for PWM control. The daisy-chain interlocking mechanism links fans together so only one cable runs to the motherboard or the included controller. This reduces internal clutter and speeds up installation in standard ATX cases or on 360 mm radiators.
The pack suits enthusiasts who prefer a unified ARGB loop managed through one header and a tidy interior. The reverse-blade design and infinity-mirror module create a consistent glow across all three fans. Buyers who need variable-speed fans without ARGB, or who require a different frame thickness for slim builds, should look at other options.
Each fan moves up to 68 CFM while producing less than 32 dB(A) at full speed. The bionic blade profile and eight damping pads keep resonance low even at 1850 RPM. This balance of static pressure and quiet operation decides whether the kit matches a high-airflow radiator or a silence-focused chassis.
| Brand | Jungle Leopard |
|---|---|
| Series | Interstellar |
| Model | Interstellar V2 |
| Part Number | Interstellar V2 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 900-1850RPM |
| Air Flow | 68CFM |
| Air Pressure | 2.4mmH20 |
| Noise Level | <32dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, the 120×120×25mm frame matches standard 360mm radiator mounting holes, and the 4-pin PWM connector works with any motherboard header.
The infinity mirror module should display a smooth, soft ARGB cycle, and each fan's RPM should read between 900-1850RPM in BIOS or monitoring software with noise below 32dB(A).
The pack ships with three fans, a dedicated controller, and the slide-in PIN-to-PIN interlocking cables so only one cable runs to the motherboard — no extra hub required.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?