Jungle Leopard Interstellar V2 RS 120mm Case Fan Infinity Mirror Module Daisy-Chain ARGB Triple Pack White
- 3 Fans
- Case Fan
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Jungle Leopard
Three 120 mm hydraulic-bearing fans deliver 68 CFM each at up to 1850 RPM while staying below 32 dB(A), and daisy-chain ARGB cables with an infinity-mirror ring keep cabling tidy
Color Black-Reverse
The Jungle Leopard Interstellar V2 triple pack delivers three 120 mm case fans in a single box. Each unit uses a hydraulic bearing and a 4-pin power connector for PWM control. The daisy-chain interlocking mechanism links fans together so only one cable runs to the motherboard or the included controller. This reduces internal clutter and speeds up installation in standard ATX cases or on 360 mm radiators.
The pack suits enthusiasts who prefer a unified ARGB loop managed through one header and a tidy interior. The reverse-blade design and infinity-mirror module create a consistent glow across all three fans. Buyers who need variable-speed fans without ARGB, or who require a different frame thickness for slim builds, should look at other options.
Each fan moves up to 68 CFM while producing less than 32 dB(A) at full speed. The bionic blade profile and eight damping pads keep resonance low even at 1850 RPM. This balance of static pressure and quiet operation decides whether the kit matches a high-airflow radiator or a silence-focused chassis.
| Brand | Jungle Leopard |
|---|---|
| Series | Interstellar |
| Model | Interstellar V2 |
| Part Number | Interstellar V2 |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing |
| RPM | 900-1850RPM |
| Air Flow | 68CFM |
| Air Pressure | 2.4mmH20 |
| Noise Level | <32dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| Dimensions | 120×120×25mm 4.72*4.72*0.98in |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Yes, the 120×120×25mm frame matches standard 360mm radiator mounting holes, and the 4-pin PWM connector works with any motherboard header.
The infinity mirror module should display a smooth, soft ARGB cycle, and each fan's RPM should read between 900-1850RPM in BIOS or monitoring software with noise below 32dB(A).
The pack ships with three fans, a dedicated controller, and the slide-in PIN-to-PIN interlocking cables so only one cable runs to the motherboard — no extra hub required.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?