Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular ATX power supply unit, matte metal finish, label shows 12V 30A and 12V 1.0A outputs

KHACHIMO

KHACHIMO XL375-12 CS Power Supply V1 12V 30A V2 1.0A

SKU CH-48PH-70VSZ

Delivers 12 V at 30 A plus a 1.0 A auxiliary rail in an ATX form factor

  • TypeATX
  • Delivers 12 V at 30 A for high-current loads
  • Auxiliary 12 V at 1.0 A powers standby rails
  • ATX form factor fits standard chassis
  • Tested working and built with good quality components

ATX power module for industrial builds

This KHACHIMO XL375-12 CS power supply is an ATX-form-factor module rated for 375 W total output. It delivers a primary 12 V rail at 30 A and a secondary 12 V rail at 1.0 A. The unit is supplied new and has been tested working.

375 W capacity with dual 12 V rails

The 30 A main rail handles demanding 12 V loads such as GPU arrays or dense storage backplanes, while the 1.0 A auxiliary rail supports standby or management circuits. Builds requiring more than 375 W combined draw or additional voltage rails will need a higher-capacity or multi-rail solution.

Priekšrocības

  • Delivers 12 V at 30 A for high-current loads
  • Auxiliary 12 V at 1.0 A powers standby rails
  • ATX form factor fits standard chassis
  • Tested working and built with good quality components

Specifikācijas

TypeATX

Jautājumi par šo preci

Will the V1 12 V 30 A rail power my existing ATX motherboard and drives without adapters?

The module follows the ATX form factor and delivers 12 V at 30 A on the V1 rail, matching standard ATX 12 V requirements for motherboards and drives.

How can I verify the V2 12 V 1.0 A auxiliary output is live after installation?

Measure 12 V on the V2 pins with a multimeter while the unit is powered on; a reading near 12 V confirms the auxiliary rail is operating.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.