Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular ATX power supply unit, matte metal finish, label shows 12V 30A and 12V 1.0A outputs

KHACHIMO

KHACHIMO XL375-12 CS Power Supply V1 12V 30A V2 1.0A

SKU CH-48PH-70VSZ

Delivers 12 V at 30 A plus a 1.0 A auxiliary rail in an ATX form factor

  • TypeATX
  • Delivers 12 V at 30 A for high-current loads
  • Auxiliary 12 V at 1.0 A powers standby rails
  • ATX form factor fits standard chassis
  • Tested working and built with good quality components

ATX power module for industrial builds

This KHACHIMO XL375-12 CS power supply is an ATX-form-factor module rated for 375 W total output. It delivers a primary 12 V rail at 30 A and a secondary 12 V rail at 1.0 A. The unit is supplied new and has been tested working.

375 W capacity with dual 12 V rails

The 30 A main rail handles demanding 12 V loads such as GPU arrays or dense storage backplanes, while the 1.0 A auxiliary rail supports standby or management circuits. Builds requiring more than 375 W combined draw or additional voltage rails will need a higher-capacity or multi-rail solution.

Privalumai

  • Delivers 12 V at 30 A for high-current loads
  • Auxiliary 12 V at 1.0 A powers standby rails
  • ATX form factor fits standard chassis
  • Tested working and built with good quality components

Specifikacijos

TypeATX

Klausimai apie šią prekę

Will the V1 12 V 30 A rail power my existing ATX motherboard and drives without adapters?

The module follows the ATX form factor and delivers 12 V at 30 A on the V1 rail, matching standard ATX 12 V requirements for motherboards and drives.

How can I verify the V2 12 V 1.0 A auxiliary output is live after installation?

Measure 12 V on the V2 pins with a multimeter while the unit is powered on; a reading near 12 V confirms the auxiliary rail is operating.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.