Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular ATX power supply unit, matte metal finish, label shows 12V 30A and 12V 1.0A outputs

KHACHIMO

KHACHIMO XL375-12 CS Power Supply V1 12V 30A V2 1.0A

SKU CH-48PH-70VSZ

Delivers 12 V at 30 A plus a 1.0 A auxiliary rail in an ATX form factor

  • TypeATX
  • Delivers 12 V at 30 A for high-current loads
  • Auxiliary 12 V at 1.0 A powers standby rails
  • ATX form factor fits standard chassis
  • Tested working and built with good quality components

ATX power module for industrial builds

This KHACHIMO XL375-12 CS power supply is an ATX-form-factor module rated for 375 W total output. It delivers a primary 12 V rail at 30 A and a secondary 12 V rail at 1.0 A. The unit is supplied new and has been tested working.

375 W capacity with dual 12 V rails

The 30 A main rail handles demanding 12 V loads such as GPU arrays or dense storage backplanes, while the 1.0 A auxiliary rail supports standby or management circuits. Builds requiring more than 375 W combined draw or additional voltage rails will need a higher-capacity or multi-rail solution.

Põhijooned

  • Delivers 12 V at 30 A for high-current loads
  • Auxiliary 12 V at 1.0 A powers standby rails
  • ATX form factor fits standard chassis
  • Tested working and built with good quality components

Tehnilised andmed

TypeATX

Küsimused selle toote kohta

Will the V1 12 V 30 A rail power my existing ATX motherboard and drives without adapters?

The module follows the ATX form factor and delivers 12 V at 30 A on the V1 rail, matching standard ATX 12 V requirements for motherboards and drives.

How can I verify the V2 12 V 1.0 A auxiliary output is live after installation?

Measure 12 V on the V2 pins with a multimeter while the unit is powered on; a reading near 12 V confirms the auxiliary rail is operating.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.