KingSpec XF-512-2280 512GB M.2 NVMe 4.0 internal SSD
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
KingSpec
M.2 2280 internal SSD with 2TB capacity, PCIe 4.0 x4 interface and NVMe 1.4 protocol delivering up to 4000 MB/s read and 3700 MB/s write speeds for gaming and creative workloads
Options XF-L 2TB 2280
The KingSpec XF-L 2TB M.2 2280 is an internal solid-state drive built for consumer desktops, laptops and NVMe-enabled NAS units. It targets gamers, video editors and other creative professionals who need large, fast storage for AAA titles, 4K or 8K footage and heavy project files.
The drive connects through a PCI-Express 4.0 x4 link and runs the NVMe 1.4 protocol. That interface is the single specification that decides whether the SSD will operate at its rated speed; a system limited to PCIe 3.0 will cap the throughput well below the advertised 4000 MBps read and 3700 MBps write.
The XF-L ships without a heatsink, so sustained workloads on platforms with restricted airflow — such as slim laptops or the PlayStation 5 expansion slot — may require an aftermarket heatsink to prevent thermal throttling. The supplier notes graphene heatsink compatibility and intelligent thermal algorithms, but the physical cooler is not bundled.
| Brand | KingSpec |
|---|---|
| Series | XF Series |
| Model | XF-L 2280 |
| Part Number | XF-L 2TB 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 4000 MBps |
| Max Sequential Write | Up to 3700 MBps |
| 4KB Random Read | Up to 715,000 IOPS |
| 4KB Random Write | Up to 890,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 1.36W |
| Power Consumption (Active) | 6.75W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 80mm |
| Width | 22mm |
| Depth | 2.1mm |
| Weight | 30g |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Those are peak sequential rates over PCIe 4.0 x4; real-world game loads, OS boots and large file copies will be noticeably faster than SATA drives, though sustained throughput depends on your motherboard lane allocation and thermal headroom.
It runs on PCIe 4.0 x4 with NVMe 1.4, so the practical ceiling is the bus bandwidth of roughly 8 GB/s; the controller tops out at the quoted 4000/3700 MB/s, and performance will drop to PCIe 3.0 speeds if installed in an older slot.
It follows the M.2 2280 form factor — 80 mm long, 22 mm wide, single-sided — and fits any standard M-key slot in laptops, desktops or PS5 expansion bays; no heatsink is included, so ensure your board or console provides one.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?