NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Kingston Technology Corp.
2GB DDR2 400 ECC registered server memory module with CL3 latency and 1.80V operation
This 2 GB Kingston ValueRAM stick is a 240‑pin DDR2 SDRAM DIMM rated at DDR2 400 (PC2 3200). It carries ECC and registered buffering for data integrity in server boards. The module runs at 1.80 V with CL3 latency and a single‑rank layout.
DDR2 memory tops out at 400 MT/s and 1.80 V, so bandwidth and capacity per slot are far below later generations. Registered DIMMs add one clock cycle of address buffering, which the memory controller must support. Mixing registered and unbuffered modules on the same channel will prevent the system from posting.
Verify that your motherboard explicitly lists DDR2 registered ECC support and accepts 240‑pin DIMMs at PC2 3200 speed. Confirm the board’s maximum capacity per slot and total populated slots, as many DDR2-era servers cap well below modern densities. Ensure the BIOS is updated to the latest revision for proper SPD recognition.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR400D2S4R3/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Features | Single Rank |
| Sūtījuma svars | 0.02 kg |
| Sūtījuma izmēri | 160 × 46 × 6 mm |
This ValueRAM stick is a single-rank 2GB module; single-rank puts less load on the memory controller and is preferred when populating many slots on a registered DDR2 server board.
The module runs at 400 MT/s with CL3 latency at 1.80 V, providing the standard DDR2 400 data rate for compatible registered ECC platforms.
The 240-pin registered DDR2 interface requires a motherboard that supports registered ECC DDR2; speed is capped at DDR2 400 and each DIMM presents a single-rank load to the memory controller.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?