NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
2GB DDR2 400 ECC registered server memory module with CL3 latency and 1.80V operation
This 2 GB Kingston ValueRAM stick is a 240‑pin DDR2 SDRAM DIMM rated at DDR2 400 (PC2 3200). It carries ECC and registered buffering for data integrity in server boards. The module runs at 1.80 V with CL3 latency and a single‑rank layout.
DDR2 memory tops out at 400 MT/s and 1.80 V, so bandwidth and capacity per slot are far below later generations. Registered DIMMs add one clock cycle of address buffering, which the memory controller must support. Mixing registered and unbuffered modules on the same channel will prevent the system from posting.
Verify that your motherboard explicitly lists DDR2 registered ECC support and accepts 240‑pin DIMMs at PC2 3200 speed. Confirm the board’s maximum capacity per slot and total populated slots, as many DDR2-era servers cap well below modern densities. Ensure the BIOS is updated to the latest revision for proper SPD recognition.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR400D2S4R3/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Features | Single Rank |
| Shipping weight | 0.02 kg |
| Package size | 160 × 46 × 6 mm |
This ValueRAM stick is a single-rank 2GB module; single-rank puts less load on the memory controller and is preferred when populating many slots on a registered DDR2 server board.
The module runs at 400 MT/s with CL3 latency at 1.80 V, providing the standard DDR2 400 data rate for compatible registered ECC platforms.
The 240-pin registered DDR2 interface requires a motherboard that supports registered ECC DDR2; speed is capped at DDR2 400 and each DIMM presents a single-rank load to the memory controller.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?