NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Kingston Technology Corp.
2GB DDR2 400 ECC registered server memory module with CL3 latency and 1.80V operation
This 2 GB Kingston ValueRAM stick is a 240‑pin DDR2 SDRAM DIMM rated at DDR2 400 (PC2 3200). It carries ECC and registered buffering for data integrity in server boards. The module runs at 1.80 V with CL3 latency and a single‑rank layout.
DDR2 memory tops out at 400 MT/s and 1.80 V, so bandwidth and capacity per slot are far below later generations. Registered DIMMs add one clock cycle of address buffering, which the memory controller must support. Mixing registered and unbuffered modules on the same channel will prevent the system from posting.
Verify that your motherboard explicitly lists DDR2 registered ECC support and accepts 240‑pin DIMMs at PC2 3200 speed. Confirm the board’s maximum capacity per slot and total populated slots, as many DDR2-era servers cap well below modern densities. Ensure the BIOS is updated to the latest revision for proper SPD recognition.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR400D2S4R3/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Features | Single Rank |
| Verzendgewicht | 0.02 kg |
| Pakketafmetingen | 160 × 46 × 6 mm |
This ValueRAM stick is a single-rank 2GB module; single-rank puts less load on the memory controller and is preferred when populating many slots on a registered DDR2 server board.
The module runs at 400 MT/s with CL3 latency at 1.80 V, providing the standard DDR2 400 data rate for compatible registered ECC platforms.
The 240-pin registered DDR2 interface requires a motherboard that supports registered ECC DDR2; speed is capped at DDR2 400 and each DIMM presents a single-rank load to the memory controller.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?