NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Kingston Technology Corp.
2GB DDR2 400 ECC registered server memory module with CL3 latency and 1.80V operation
This 2 GB Kingston ValueRAM stick is a 240‑pin DDR2 SDRAM DIMM rated at DDR2 400 (PC2 3200). It carries ECC and registered buffering for data integrity in server boards. The module runs at 1.80 V with CL3 latency and a single‑rank layout.
DDR2 memory tops out at 400 MT/s and 1.80 V, so bandwidth and capacity per slot are far below later generations. Registered DIMMs add one clock cycle of address buffering, which the memory controller must support. Mixing registered and unbuffered modules on the same channel will prevent the system from posting.
Verify that your motherboard explicitly lists DDR2 registered ECC support and accepts 240‑pin DIMMs at PC2 3200 speed. Confirm the board’s maximum capacity per slot and total populated slots, as many DDR2-era servers cap well below modern densities. Ensure the BIOS is updated to the latest revision for proper SPD recognition.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR400D2S4R3/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Features | Single Rank |
| Peso di spedizione | 0.02 kg |
| Dimensioni del pacco | 160 × 46 × 6 mm |
This ValueRAM stick is a single-rank 2GB module; single-rank puts less load on the memory controller and is preferred when populating many slots on a registered DDR2 server board.
The module runs at 400 MT/s with CL3 latency at 1.80 V, providing the standard DDR2 400 data rate for compatible registered ECC platforms.
The 240-pin registered DDR2 interface requires a motherboard that supports registered ECC DDR2; speed is capped at DDR2 400 and each DIMM presents a single-rank load to the memory controller.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?