Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Open metal bracket converts 2.5 SATA or SAS drive to 3.5 form factor

LORDWORLD

LORDWORLD 2.5 to 3.5 SATA SAS Hard Drive Adapter EZConvert MB882SP-1S-3B

SKU CH-1KQD-Z17S0

Converts 2.5 SATA or SAS drives into exact 3.5 SATA form factor, supports 7mm to 15mm heights with open airflow design

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

2.5 to 3.5 SATA SAS Adapter

The LORDWORLD EZConvert MB882SP-1S-3B converts a 2.5 inch SATA or SAS drive into a 3.5 inch form factor. It accepts drives from 7mm to 15mm in height and supports SATA 6Gbps or single channel SAS operation. The open air design provides airflow around the installed drive.

Suits single channel SAS or SATA builds

This adapter fits builders who need to mount a 2.5 inch SATA SSD or HDD into a standard 3.5 inch drive bay. It also serves users with a SAS host requiring single channel SAS functionality. Systems needing dual channel SAS support cannot use this adapter.

Single channel SAS host requirement

SAS operation requires a compatible SAS host controller to function. The bracket handles SATA 6Gbps and single channel SAS signals through the same connector. Without a SAS host the drive will operate in SATA mode only.

Priekšrocības

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Should I pick this adapter for a 7 mm drive or a 15 mm drive?

It accepts any 2.5" SATA or SAS drive from 7 mm to 15 mm thick so one unit covers the full range.

What speed will my SATA SSD actually run at once mounted in this bracket?

The adapter passes SATA 6 Gbps through without slowing the drive down.

Does the SAS single-channel support limit the SATA link to 3 Gbps?

No, SATA 6 Gbps is supported alongside SAS single-channel operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.