Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Open metal bracket converts 2.5 SATA or SAS drive to 3.5 form factor

LORDWORLD

LORDWORLD 2.5 to 3.5 SATA SAS Hard Drive Adapter EZConvert MB882SP-1S-3B

SKU CH-1KQD-Z17S0

Converts 2.5 SATA or SAS drives into exact 3.5 SATA form factor, supports 7mm to 15mm heights with open airflow design

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

2.5 to 3.5 SATA SAS Adapter

The LORDWORLD EZConvert MB882SP-1S-3B converts a 2.5 inch SATA or SAS drive into a 3.5 inch form factor. It accepts drives from 7mm to 15mm in height and supports SATA 6Gbps or single channel SAS operation. The open air design provides airflow around the installed drive.

Suits single channel SAS or SATA builds

This adapter fits builders who need to mount a 2.5 inch SATA SSD or HDD into a standard 3.5 inch drive bay. It also serves users with a SAS host requiring single channel SAS functionality. Systems needing dual channel SAS support cannot use this adapter.

Single channel SAS host requirement

SAS operation requires a compatible SAS host controller to function. The bracket handles SATA 6Gbps and single channel SAS signals through the same connector. Without a SAS host the drive will operate in SATA mode only.

Helstu kostir

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

Should I pick this adapter for a 7 mm drive or a 15 mm drive?

It accepts any 2.5" SATA or SAS drive from 7 mm to 15 mm thick so one unit covers the full range.

What speed will my SATA SSD actually run at once mounted in this bracket?

The adapter passes SATA 6 Gbps through without slowing the drive down.

Does the SAS single-channel support limit the SATA link to 3 Gbps?

No, SATA 6 Gbps is supported alongside SAS single-channel operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.