Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Open metal bracket converts 2.5 SATA or SAS drive to 3.5 form factor

LORDWORLD

LORDWORLD 2.5 to 3.5 SATA SAS Hard Drive Adapter EZConvert MB882SP-1S-3B

SKU CH-1KQD-Z17S0

Converts 2.5 SATA or SAS drives into exact 3.5 SATA form factor, supports 7mm to 15mm heights with open airflow design

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

2.5 to 3.5 SATA SAS Adapter

The LORDWORLD EZConvert MB882SP-1S-3B converts a 2.5 inch SATA or SAS drive into a 3.5 inch form factor. It accepts drives from 7mm to 15mm in height and supports SATA 6Gbps or single channel SAS operation. The open air design provides airflow around the installed drive.

Suits single channel SAS or SATA builds

This adapter fits builders who need to mount a 2.5 inch SATA SSD or HDD into a standard 3.5 inch drive bay. It also serves users with a SAS host requiring single channel SAS functionality. Systems needing dual channel SAS support cannot use this adapter.

Single channel SAS host requirement

SAS operation requires a compatible SAS host controller to function. The bracket handles SATA 6Gbps and single channel SAS signals through the same connector. Without a SAS host the drive will operate in SATA mode only.

Přednosti

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Should I pick this adapter for a 7 mm drive or a 15 mm drive?

It accepts any 2.5" SATA or SAS drive from 7 mm to 15 mm thick so one unit covers the full range.

What speed will my SATA SSD actually run at once mounted in this bracket?

The adapter passes SATA 6 Gbps through without slowing the drive down.

Does the SAS single-channel support limit the SATA link to 3 Gbps?

No, SATA 6 Gbps is supported alongside SAS single-channel operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.