Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Open metal bracket converts 2.5 SATA or SAS drive to 3.5 form factor

LORDWORLD

LORDWORLD 2.5 to 3.5 SATA SAS Hard Drive Adapter EZConvert MB882SP-1S-3B

SKU CH-1KQD-Z17S0

Converts 2.5 SATA or SAS drives into exact 3.5 SATA form factor, supports 7mm to 15mm heights with open airflow design

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

2.5 to 3.5 SATA SAS Adapter

The LORDWORLD EZConvert MB882SP-1S-3B converts a 2.5 inch SATA or SAS drive into a 3.5 inch form factor. It accepts drives from 7mm to 15mm in height and supports SATA 6Gbps or single channel SAS operation. The open air design provides airflow around the installed drive.

Suits single channel SAS or SATA builds

This adapter fits builders who need to mount a 2.5 inch SATA SSD or HDD into a standard 3.5 inch drive bay. It also serves users with a SAS host requiring single channel SAS functionality. Systems needing dual channel SAS support cannot use this adapter.

Single channel SAS host requirement

SAS operation requires a compatible SAS host controller to function. The bracket handles SATA 6Gbps and single channel SAS signals through the same connector. Without a SAS host the drive will operate in SATA mode only.

Poudarki

  • Converts 2.5 SATA SSD or HDD to exact 3.5 SATA form factor
  • Supports 2.5 SAS HDD or SSD with single channel SAS functions
  • Handles SATA 6Gbps or SAS single channel speeds
  • Fits 2.5 SATA or SAS drives from 7mm to 15mm height
  • Open air design with all around airflow vents for cooling

Specifikacije

BrandLORDWORLD

Vprašanja o tem izdelku

Should I pick this adapter for a 7 mm drive or a 15 mm drive?

It accepts any 2.5" SATA or SAS drive from 7 mm to 15 mm thick so one unit covers the full range.

What speed will my SATA SSD actually run at once mounted in this bracket?

The adapter passes SATA 6 Gbps through without slowing the drive down.

Does the SAS single-channel support limit the SATA link to 3 Gbps?

No, SATA 6 Gbps is supported alongside SAS single-channel operation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.