Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small rectangular e-paper display board with black and white screen and gold pin header

LORDWORLD

LORDWORLD 2.66inch E-Paper HAT 296×152 Black/White SPI

SKU CH-ZEKR-5SF0D

A 2.66 inch e-paper display HAT with 296 by 152 pixel resolution, SPI interface, no backlight and ultra-low power consumption for Raspberry Pi and Jetson Nano

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

2.66inch E-Paper HAT for Raspberry Pi

The LORDWORLD 2.66inch E-Paper HAT is a 296×152 pixel black-and-white display module designed for microcontroller projects. It connects via SPI and includes an onboard voltage translator for 3.3V and 5V logic compatibility. The panel requires no backlight and retains the last image indefinitely without power.

Ideal for low-power IoT nodes and static readouts

Developers building battery-powered sensors, shelf labels or status badges will benefit from the ultra-low consumption that draws current only during refresh. Projects needing video-rate animation, colour graphics or continuous backlighting should consider alternative display technologies.

296×152 resolution defines the content fit

The fixed pixel grid determines how much text or graphics fit on the 2.66inch panel. Layouts must be designed to this exact resolution; the display cannot scale or crop incoming frames automatically.

Priekšrocības

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

How do I verify the 2.66inch E-Paper HAT is working after wiring it to my Raspberry Pi?

Run a SPI test script that sends a full-screen refresh; the 296×152 panel should flip from white to black and hold the image without power.

What comes in the box with the LORDWORLD 2.66inch E-Paper HAT and what must I supply?

The HAT includes the e-paper panel and onboard voltage translator; you provide a Raspberry Pi, Jetson Nano or STM32 board plus jumper wires for the SPI pins.

Which version of the 2.66inch E-Paper HAT should I choose for a 3.3V or 5V microcontroller?

The single version listed has an onboard voltage translator, so it works with both 3.3V and 5V MCUs without any extra hardware.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.