Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small rectangular e-paper display board with black and white screen and gold pin header

LORDWORLD

LORDWORLD 2.66inch E-Paper HAT 296×152 Black/White SPI

SKU CH-ZEKR-5SF0D

A 2.66 inch e-paper display HAT with 296 by 152 pixel resolution, SPI interface, no backlight and ultra-low power consumption for Raspberry Pi and Jetson Nano

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

2.66inch E-Paper HAT for Raspberry Pi

The LORDWORLD 2.66inch E-Paper HAT is a 296×152 pixel black-and-white display module designed for microcontroller projects. It connects via SPI and includes an onboard voltage translator for 3.3V and 5V logic compatibility. The panel requires no backlight and retains the last image indefinitely without power.

Ideal for low-power IoT nodes and static readouts

Developers building battery-powered sensors, shelf labels or status badges will benefit from the ultra-low consumption that draws current only during refresh. Projects needing video-rate animation, colour graphics or continuous backlighting should consider alternative display technologies.

296×152 resolution defines the content fit

The fixed pixel grid determines how much text or graphics fit on the 2.66inch panel. Layouts must be designed to this exact resolution; the display cannot scale or crop incoming frames automatically.

Helstu kostir

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

How do I verify the 2.66inch E-Paper HAT is working after wiring it to my Raspberry Pi?

Run a SPI test script that sends a full-screen refresh; the 296×152 panel should flip from white to black and hold the image without power.

What comes in the box with the LORDWORLD 2.66inch E-Paper HAT and what must I supply?

The HAT includes the e-paper panel and onboard voltage translator; you provide a Raspberry Pi, Jetson Nano or STM32 board plus jumper wires for the SPI pins.

Which version of the 2.66inch E-Paper HAT should I choose for a 3.3V or 5V microcontroller?

The single version listed has an onboard voltage translator, so it works with both 3.3V and 5V MCUs without any extra hardware.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.