Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small rectangular e-paper display board with black and white screen and gold pin header

LORDWORLD

LORDWORLD 2.66inch E-Paper HAT 296×152 Black/White SPI

SKU CH-ZEKR-5SF0D

A 2.66 inch e-paper display HAT with 296 by 152 pixel resolution, SPI interface, no backlight and ultra-low power consumption for Raspberry Pi and Jetson Nano

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

2.66inch E-Paper HAT for Raspberry Pi

The LORDWORLD 2.66inch E-Paper HAT is a 296×152 pixel black-and-white display module designed for microcontroller projects. It connects via SPI and includes an onboard voltage translator for 3.3V and 5V logic compatibility. The panel requires no backlight and retains the last image indefinitely without power.

Ideal for low-power IoT nodes and static readouts

Developers building battery-powered sensors, shelf labels or status badges will benefit from the ultra-low consumption that draws current only during refresh. Projects needing video-rate animation, colour graphics or continuous backlighting should consider alternative display technologies.

296×152 resolution defines the content fit

The fixed pixel grid determines how much text or graphics fit on the 2.66inch panel. Layouts must be designed to this exact resolution; the display cannot scale or crop incoming frames automatically.

Pluspunten

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

Specificaties

BrandLORDWORLD

Vragen over dit artikel

How do I verify the 2.66inch E-Paper HAT is working after wiring it to my Raspberry Pi?

Run a SPI test script that sends a full-screen refresh; the 296×152 panel should flip from white to black and hold the image without power.

What comes in the box with the LORDWORLD 2.66inch E-Paper HAT and what must I supply?

The HAT includes the e-paper panel and onboard voltage translator; you provide a Raspberry Pi, Jetson Nano or STM32 board plus jumper wires for the SPI pins.

Which version of the 2.66inch E-Paper HAT should I choose for a 3.3V or 5V microcontroller?

The single version listed has an onboard voltage translator, so it works with both 3.3V and 5V MCUs without any extra hardware.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.