暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular e-paper display board with black and white screen and gold pin header

LORDWORLD

LORDWORLD 2.66inch E-Paper HAT 296×152 Black/White SPI

SKU CH-ZEKR-5SF0D

A 2.66 inch e-paper display HAT with 296 by 152 pixel resolution, SPI interface, no backlight and ultra-low power consumption for Raspberry Pi and Jetson Nano

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

2.66inch E-Paper HAT for Raspberry Pi

The LORDWORLD 2.66inch E-Paper HAT is a 296×152 pixel black-and-white display module designed for microcontroller projects. It connects via SPI and includes an onboard voltage translator for 3.3V and 5V logic compatibility. The panel requires no backlight and retains the last image indefinitely without power.

Ideal for low-power IoT nodes and static readouts

Developers building battery-powered sensors, shelf labels or status badges will benefit from the ultra-low consumption that draws current only during refresh. Projects needing video-rate animation, colour graphics or continuous backlighting should consider alternative display technologies.

296×152 resolution defines the content fit

The fixed pixel grid determines how much text or graphics fit on the 2.66inch panel. Layouts must be designed to this exact resolution; the display cannot scale or crop incoming frames automatically.

特長

  • Retains image without power thanks to zero-backlight e-paper
  • Connects directly to Raspberry Pi Jetson Nano STM32 via SPI
  • Draws power only during refresh for ultra-low consumption
  • Works with both 3.3V and 5V logic through onboard translator
  • 66inch 296×152 black-white display for clear readable output

仕様

BrandLORDWORLD

この商品に関する質問

How do I verify the 2.66inch E-Paper HAT is working after wiring it to my Raspberry Pi?

Run a SPI test script that sends a full-screen refresh; the 296×152 panel should flip from white to black and hold the image without power.

What comes in the box with the LORDWORLD 2.66inch E-Paper HAT and what must I supply?

The HAT includes the e-paper panel and onboard voltage translator; you provide a Raspberry Pi, Jetson Nano or STM32 board plus jumper wires for the SPI pins.

Which version of the 2.66inch E-Paper HAT should I choose for a 3.3V or 5V microcontroller?

The single version listed has an onboard voltage translator, so it works with both 3.3V and 5V MCUs without any extra hardware.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。