Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two small green circuit boards with USB-C ports and pin headers

LORDWORLD

LORDWORLD ESP32-C3FN4 Mini Development Board 2-Pack with Pre-Soldered Headers

SKU CH-7M1Q-DM1ZA

Two RISC-V boards with pre-soldered headers, 2.4 GHz Wi-Fi, Bluetooth 5, 15 GPIO and 400 KB SRAM for compact IoT prototypes

  • RISC-V single-core processor reaches 160 MHz for responsive IoT control
  • 4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE enable wireless projects
  • 400 KB SRAM plus 384 KB ROM and 4 MB Flash store code and data
  • 15 GPIO pins with 3 SPI, 1 I2C, 2 UART, 1 I2S, 2 ADC connect diverse peripherals
  • USB Type-C port with integrated serial controller simplifies programming and power

ESP32-C3FN4 development board pair

This pack supplies two LORDWORLD ESP32-C3FN4 mini development boards with headers already soldered. Each board uses a 32-bit RISC-V single-core processor running up to 160MHz and includes 400KB SRAM, 384KB ROM and 4MB onboard Flash. The pair suits makers building Wi-Fi and Bluetooth LE connected devices.

Sustained-load behaviour

Under continuous operation the 160MHz core handles sensor polling, protocol stacks and logic without thermal throttling. 2.4GHz 802.11 b/g/n Wi-Fi and Bluetooth 5 LE maintain links while the 15 GPIO pins drive peripherals through 3 SPI, 1 I2C, 2 UART, 1 I2S and 2 ADC channels. The castellated module can be soldered directly to a carrier board for permanent deployment.

Thermals, noise and power

The low-power SoC draws minimal current and runs silently with no moving parts. Flexible clock control and independent module supply settings let the firmware reduce consumption in idle or deep-sleep phases. An onboard ceramic antenna keeps the RF path compact, and the USB Type-C port provides both power and serial debugging during development.

Priekšrocības

  • RISC-V single-core processor reaches 160 MHz for responsive IoT control
  • 4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE enable wireless projects
  • 400 KB SRAM plus 384 KB ROM and 4 MB Flash store code and data
  • 15 GPIO pins with 3 SPI, 1 I2C, 2 UART, 1 I2S, 2 ADC connect diverse peripherals
  • USB Type-C port with integrated serial controller simplifies programming and power

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

How much heat or power does the RISC-V processor draw when running at 160 MHz all day?

The ESP32-C3FN4 is a low-power SoC designed for flexible clock and independent module power settings, enabling low consumption across different scenarios.

What power source and host computer do I need to program the board through its USB Type-C port?

A USB-C cable and a computer with a USB port are required to supply power and provide the serial connection for flashing firmware.

Will the Bluetooth 5 LE radio interfere with older 2.4 GHz Wi-Fi 802.11 b/g/n gear I already use?

Both radios share the 2.4 GHz band; the chipset handles coexistence, but heavy simultaneous traffic on both may reduce throughput on either link.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.