Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

Montech

Montech Heritage PRO White Micro ATX PC Case

SKU CH-X2RA-VPKAG

A compact Micro ATX case with steel, leather and tempered glass panels, four pre-installed PWM fans, support for a 360 mm radiator and a leather strap rated for 40 kg

  • TypeMicro ATX/Mini ITX (Backplane)
  • ColorWhite
  • Case MaterialSteel / Leather / Tempered Glass
  • Motherboard CompatibilityMicro ATX / Mini-ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1

Options Heritage PRO White

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Heritage PRO White Micro ATX Case

The Montech Heritage PRO White is a Micro ATX and Mini-ITX backplane chassis finished in white steel, leather and tempered glass. It targets builders who want a compact, portable case with a distinctive eco-leather aesthetic and integrated carry strap for LAN events or frequent moves.

Suits portable showcase builds; not for E-ATX boards

This case suits gamers and creators who prioritise style, portability and the ability to carry a complete system by its leather strap. Builders needing E-ATX motherboard support, more than two 3.5-inch drive bays or a standard layout without a backplane should look at larger alternatives.

Backplane layout with 360 mm top radiator support

The defining specification is the backplane motherboard orientation combined with top-mounted radiator support up to 360 mm. This layout dictates component clearance, cable routing paths and the simultaneous fit of an ATX power supply plus a 40-series graphics card.

Priekšrocības

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Specifikācijas

BrandMontech
ModelHeritage PRO White
TypeMicro ATX/Mini ITX (Backplane)
ColorWhite
Case MaterialSteel / Leather / Tempered Glass
Motherboard CompatibilityMicro ATX / Mini-ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots5
Fan OptionsSide:120mm*2 , Top:120*3/140*2, Bottom: 120*3,
Rear: 120*1
Radiator OptionsTop - Up to 360mm
120mm Fans4x 120 PWM Fans
Sūtījuma svars8.71 kg
Sūtījuma izmēri559 × 457 × 318 mm

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How often should the four 120mm PWM fans be cleaned or replaced for sustained airflow?

Dust the four 120mm PWM fans every few months; replace any fan that develops bearing noise or reduced RPM.

Which thermal limit appears first when a 360mm radiator runs at full load for hours?

The 360mm top radiator can exhaust the heat from a 40-series GPU and CPU, but case airflow becomes the bottleneck before coolant temperature peaks.

How loud is the system with three reverse fans and one standard fan spinning all day?

The four 120mm PWM fans run quietly at low speed and ramp up only under heavy load, keeping noise low during typical all-day use.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.