Montech
Montech Heritage White Micro ATX PC Case
- Micro ATX/Mini ITX…
- White
63,99 $US
0.0008141BTC
En stock
Montech
Montech Heritage PRO White Micro ATX PC Case
A compact Micro ATX case with steel, leather and tempered glass panels, four pre-installed PWM fans, support for a 360 mm radiator and a leather strap rated for 40 kg
- TypeMicro ATX/Mini ITX (Backplane)
- ColorWhite
- Case MaterialSteel / Leather / Tempered Glass
- Motherboard CompatibilityMicro ATX / Mini-ITX
- Internal 3.5" Drive Bays2
- Internal 2.5" Drive Bays1
Options Heritage PRO White
- Heritage White
- Heritage PRO Black
- Heritage PRO White
Les versions barrées existent, mais ne sont pas disponibles ici.
- Portable build with leather strap rated for 40 kg
- Four pre-installed 120 mm PWM fans for immediate airflow
- Supports 360 mm radiator on top for liquid cooling
- Fits ATX PSU and 40-series GPU in Micro ATX frame
- Steel, leather and tempered glass construction with triangular mesh design
Heritage PRO White Micro ATX Case
The Montech Heritage PRO White is a Micro ATX and Mini-ITX backplane chassis finished in white steel, leather and tempered glass. It targets builders who want a compact, portable case with a distinctive eco-leather aesthetic and integrated carry strap for LAN events or frequent moves.
Suits portable showcase builds; not for E-ATX boards
This case suits gamers and creators who prioritise style, portability and the ability to carry a complete system by its leather strap. Builders needing E-ATX motherboard support, more than two 3.5-inch drive bays or a standard layout without a backplane should look at larger alternatives.
Backplane layout with 360 mm top radiator support
The defining specification is the backplane motherboard orientation combined with top-mounted radiator support up to 360 mm. This layout dictates component clearance, cable routing paths and the simultaneous fit of an ATX power supply plus a 40-series graphics card.
Points forts
- Portable build with leather strap rated for 40 kg
- Four pre-installed 120 mm PWM fans for immediate airflow
- Supports 360 mm radiator on top for liquid cooling
- Fits ATX PSU and 40-series GPU in Micro ATX frame
- Steel, leather and tempered glass construction with triangular mesh design
Caractéristiques
| Brand | Montech |
|---|---|
| Model | Heritage PRO White |
| Type | Micro ATX/Mini ITX (Backplane) |
| Color | White |
| Case Material | Steel / Leather / Tempered Glass |
| Motherboard Compatibility | Micro ATX / Mini-ITX |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 5 |
| Fan Options | Side:120mm*2 , Top:120*3/140*2, Bottom: 120*3, Rear: 120*1 |
| Radiator Options | Top - Up to 360mm |
| 120mm Fans | 4x 120 PWM Fans |
| Poids d’expédition | 8.71 kg |
| Dimensions du colis | 559 × 457 × 318 mm |
Autres versions de ce modèle
1 de plus dans cette gamme
Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.
Questions sur cet article
How often should the four 120mm PWM fans be cleaned or replaced for sustained airflow?
Dust the four 120mm PWM fans every few months; replace any fan that develops bearing noise or reduced RPM.
Which thermal limit appears first when a 360mm radiator runs at full load for hours?
The 360mm top radiator can exhaust the heat from a 40-series GPU and CPU, but case airflow becomes the bottleneck before coolant temperature peaks.
How loud is the system with three reverse fans and one standard fan spinning all day?
The four 120mm PWM fans run quietly at low speed and ramp up only under heavy load, keeping noise low during typical all-day use.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
