Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Montech

Montech Heritage PRO White Micro ATX PC Case

SKU CH-X2RA-VPKAG

A compact Micro ATX case with steel, leather and tempered glass panels, four pre-installed PWM fans, support for a 360 mm radiator and a leather strap rated for 40 kg

  • TypeMicro ATX/Mini ITX (Backplane)
  • ColorWhite
  • Case MaterialSteel / Leather / Tempered Glass
  • Motherboard CompatibilityMicro ATX / Mini-ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1

Options Heritage PRO White

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Heritage PRO White Micro ATX Case

The Montech Heritage PRO White is a Micro ATX and Mini-ITX backplane chassis finished in white steel, leather and tempered glass. It targets builders who want a compact, portable case with a distinctive eco-leather aesthetic and integrated carry strap for LAN events or frequent moves.

Suits portable showcase builds; not for E-ATX boards

This case suits gamers and creators who prioritise style, portability and the ability to carry a complete system by its leather strap. Builders needing E-ATX motherboard support, more than two 3.5-inch drive bays or a standard layout without a backplane should look at larger alternatives.

Backplane layout with 360 mm top radiator support

The defining specification is the backplane motherboard orientation combined with top-mounted radiator support up to 360 mm. This layout dictates component clearance, cable routing paths and the simultaneous fit of an ATX power supply plus a 40-series graphics card.

Přednosti

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Specifikace

BrandMontech
ModelHeritage PRO White
TypeMicro ATX/Mini ITX (Backplane)
ColorWhite
Case MaterialSteel / Leather / Tempered Glass
Motherboard CompatibilityMicro ATX / Mini-ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots5
Fan OptionsSide:120mm*2 , Top:120*3/140*2, Bottom: 120*3,
Rear: 120*1
Radiator OptionsTop - Up to 360mm
120mm Fans4x 120 PWM Fans
Přepravní hmotnost8.71 kg
Rozměry balení559 × 457 × 318 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How often should the four 120mm PWM fans be cleaned or replaced for sustained airflow?

Dust the four 120mm PWM fans every few months; replace any fan that develops bearing noise or reduced RPM.

Which thermal limit appears first when a 360mm radiator runs at full load for hours?

The 360mm top radiator can exhaust the heat from a 40-series GPU and CPU, but case airflow becomes the bottleneck before coolant temperature peaks.

How loud is the system with three reverse fans and one standard fan spinning all day?

The four 120mm PWM fans run quietly at low speed and ramp up only under heavy load, keeping noise low during typical all-day use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.