Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход

Montech

Montech Heritage PRO White Micro ATX PC Case

SKU CH-X2RA-VPKAG

A compact Micro ATX case with steel, leather and tempered glass panels, four pre-installed PWM fans, support for a 360 mm radiator and a leather strap rated for 40 kg

  • TypeMicro ATX/Mini ITX (Backplane)
  • ColorWhite
  • Case MaterialSteel / Leather / Tempered Glass
  • Motherboard CompatibilityMicro ATX / Mini-ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1

Options Heritage PRO White

Зачертаните версии съществуват, но не се предлагат тук.

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Heritage PRO White Micro ATX Case

The Montech Heritage PRO White is a Micro ATX and Mini-ITX backplane chassis finished in white steel, leather and tempered glass. It targets builders who want a compact, portable case with a distinctive eco-leather aesthetic and integrated carry strap for LAN events or frequent moves.

Suits portable showcase builds; not for E-ATX boards

This case suits gamers and creators who prioritise style, portability and the ability to carry a complete system by its leather strap. Builders needing E-ATX motherboard support, more than two 3.5-inch drive bays or a standard layout without a backplane should look at larger alternatives.

Backplane layout with 360 mm top radiator support

The defining specification is the backplane motherboard orientation combined with top-mounted radiator support up to 360 mm. This layout dictates component clearance, cable routing paths and the simultaneous fit of an ATX power supply plus a 40-series graphics card.

Акценти

  • Portable build with leather strap rated for 40 kg
  • Four pre-installed 120 mm PWM fans for immediate airflow
  • Supports 360 mm radiator on top for liquid cooling
  • Fits ATX PSU and 40-series GPU in Micro ATX frame
  • Steel, leather and tempered glass construction with triangular mesh design

Спецификации

BrandMontech
ModelHeritage PRO White
TypeMicro ATX/Mini ITX (Backplane)
ColorWhite
Case MaterialSteel / Leather / Tempered Glass
Motherboard CompatibilityMicro ATX / Mini-ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots5
Fan OptionsSide:120mm*2 , Top:120*3/140*2, Bottom: 120*3,
Rear: 120*1
Radiator OptionsTop - Up to 360mm
120mm Fans4x 120 PWM Fans
Тегло на пратката8.71 kg
Размери на опаковката559 × 457 × 318 mm

Други версии на този модел

1 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How often should the four 120mm PWM fans be cleaned or replaced for sustained airflow?

Dust the four 120mm PWM fans every few months; replace any fan that develops bearing noise or reduced RPM.

Which thermal limit appears first when a 360mm radiator runs at full load for hours?

The 360mm top radiator can exhaust the heat from a 40-series GPU and CPU, but case airflow becomes the bottleneck before coolant temperature peaks.

How loud is the system with three reverse fans and one standard fan spinning all day?

The four 120mm PWM fans run quietly at low speed and ramp up only under heavy load, keeping noise low during typical all-day use.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.