BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
MSI
ATX board for Ryzen CPUs with PCIe 4.0, DDR4 to 4400 MHz, SATA 6Gb/s, M.2, USB 3.2 Gen 2 and HDMI, plus Frozr heatsink and Audio Boost 4
The MSI MPG X570 Gaming Plus is an ATX board built around the X570 chipset for Socket AM4 Ryzen processors. It delivers PCIe 4.0 lanes for graphics and M.2 storage, plus DDR4 memory support up to 4400 MHz when overclocked. USB 3.2 Gen 2 and HDMI round out the rear I/O. This board targets builders who want current-gen Ryzen performance on a mature platform.
Enthusiasts adding Gen4 M.2 SSDs or pushing DDR4 past standard JEDEC speeds will benefit from the electrical design and Frozr heatsink with active cooling. The pre-fitted I/O shield simplifies assembly. Builders staying with PCIe 3.0 drives, running locked memory, or needing a smaller form factor should consider alternative chipsets or board sizes.
The X570 chipset is the sole component that provides chipset-linked PCIe 4.0 lanes for M.2 and secondary slots on this Socket AM4 platform. Without it, M.2 devices operate at PCIe 3.0 speeds even if the CPU supports Gen4. Verify that your Ryzen CPU and chosen SSD both support PCIe 4.0 to use the full bandwidth.
| Brand | MSI |
|---|---|
| Model | MPG X570 GAMING PLUS |
| CPU Type | Ryzen Series |
| Form Factor | ATX |
The board follows the ATX form factor, so it fits any standard ATX chassis. Power delivery uses an 8-pin plus a 4-pin CPU connector, so your PSU must provide both plugs.
The shield comes already mounted on the board; simply align it with the case cut-out and secure the motherboard screws. Builders often forget to press each corner until the grounding tabs click into the case.
Dust the heatsink fins and fan blades every few months with compressed air. The double ball-bearing fan is lubricated for long life; if noise or vibration appears years later, replace the fan unit only.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?