BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
MSI
ATX board for Ryzen CPUs with PCIe 4.0, DDR4 to 4400 MHz, SATA 6Gb/s, M.2, USB 3.2 Gen 2 and HDMI, plus Frozr heatsink and Audio Boost 4
The MSI MPG X570 Gaming Plus is an ATX board built around the X570 chipset for Socket AM4 Ryzen processors. It delivers PCIe 4.0 lanes for graphics and M.2 storage, plus DDR4 memory support up to 4400 MHz when overclocked. USB 3.2 Gen 2 and HDMI round out the rear I/O. This board targets builders who want current-gen Ryzen performance on a mature platform.
Enthusiasts adding Gen4 M.2 SSDs or pushing DDR4 past standard JEDEC speeds will benefit from the electrical design and Frozr heatsink with active cooling. The pre-fitted I/O shield simplifies assembly. Builders staying with PCIe 3.0 drives, running locked memory, or needing a smaller form factor should consider alternative chipsets or board sizes.
The X570 chipset is the sole component that provides chipset-linked PCIe 4.0 lanes for M.2 and secondary slots on this Socket AM4 platform. Without it, M.2 devices operate at PCIe 3.0 speeds even if the CPU supports Gen4. Verify that your Ryzen CPU and chosen SSD both support PCIe 4.0 to use the full bandwidth.
| Brand | MSI |
|---|---|
| Model | MPG X570 GAMING PLUS |
| CPU Type | Ryzen Series |
| Form Factor | ATX |
The board follows the ATX form factor, so it fits any standard ATX chassis. Power delivery uses an 8-pin plus a 4-pin CPU connector, so your PSU must provide both plugs.
The shield comes already mounted on the board; simply align it with the case cut-out and secure the motherboard screws. Builders often forget to press each corner until the grounding tabs click into the case.
Dust the heatsink fins and fan blades every few months with compressed air. The double ball-bearing fan is lubricated for long life; if noise or vibration appears years later, replace the fan unit only.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?