BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
MSI
ATX board for Ryzen CPUs with PCIe 4.0, DDR4 to 4400 MHz, SATA 6Gb/s, M.2, USB 3.2 Gen 2 and HDMI, plus Frozr heatsink and Audio Boost 4
The MSI MPG X570 Gaming Plus is an ATX board built around the X570 chipset for Socket AM4 Ryzen processors. It delivers PCIe 4.0 lanes for graphics and M.2 storage, plus DDR4 memory support up to 4400 MHz when overclocked. USB 3.2 Gen 2 and HDMI round out the rear I/O. This board targets builders who want current-gen Ryzen performance on a mature platform.
Enthusiasts adding Gen4 M.2 SSDs or pushing DDR4 past standard JEDEC speeds will benefit from the electrical design and Frozr heatsink with active cooling. The pre-fitted I/O shield simplifies assembly. Builders staying with PCIe 3.0 drives, running locked memory, or needing a smaller form factor should consider alternative chipsets or board sizes.
The X570 chipset is the sole component that provides chipset-linked PCIe 4.0 lanes for M.2 and secondary slots on this Socket AM4 platform. Without it, M.2 devices operate at PCIe 3.0 speeds even if the CPU supports Gen4. Verify that your Ryzen CPU and chosen SSD both support PCIe 4.0 to use the full bandwidth.
| Brand | MSI |
|---|---|
| Model | MPG X570 GAMING PLUS |
| CPU Type | Ryzen Series |
| Form Factor | ATX |
The board follows the ATX form factor, so it fits any standard ATX chassis. Power delivery uses an 8-pin plus a 4-pin CPU connector, so your PSU must provide both plugs.
The shield comes already mounted on the board; simply align it with the case cut-out and secure the motherboard screws. Builders often forget to press each corner until the grounding tabs click into the case.
Dust the heatsink fins and fan blades every few months with compressed air. The double ball-bearing fan is lubricated for long life; if noise or vibration appears years later, replace the fan unit only.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?