BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
MSI
ATX board for Ryzen CPUs with PCIe 4.0, DDR4 to 4400 MHz, SATA 6Gb/s, M.2, USB 3.2 Gen 2 and HDMI, plus Frozr heatsink and Audio Boost 4
The MSI MPG X570 Gaming Plus is an ATX board built around the X570 chipset for Socket AM4 Ryzen processors. It delivers PCIe 4.0 lanes for graphics and M.2 storage, plus DDR4 memory support up to 4400 MHz when overclocked. USB 3.2 Gen 2 and HDMI round out the rear I/O. This board targets builders who want current-gen Ryzen performance on a mature platform.
Enthusiasts adding Gen4 M.2 SSDs or pushing DDR4 past standard JEDEC speeds will benefit from the electrical design and Frozr heatsink with active cooling. The pre-fitted I/O shield simplifies assembly. Builders staying with PCIe 3.0 drives, running locked memory, or needing a smaller form factor should consider alternative chipsets or board sizes.
The X570 chipset is the sole component that provides chipset-linked PCIe 4.0 lanes for M.2 and secondary slots on this Socket AM4 platform. Without it, M.2 devices operate at PCIe 3.0 speeds even if the CPU supports Gen4. Verify that your Ryzen CPU and chosen SSD both support PCIe 4.0 to use the full bandwidth.
| Brand | MSI |
|---|---|
| Model | MPG X570 GAMING PLUS |
| CPU Type | Ryzen Series |
| Form Factor | ATX |
The board follows the ATX form factor, so it fits any standard ATX chassis. Power delivery uses an 8-pin plus a 4-pin CPU connector, so your PSU must provide both plugs.
The shield comes already mounted on the board; simply align it with the case cut-out and secure the motherboard screws. Builders often forget to press each corner until the grounding tabs click into the case.
Dust the heatsink fins and fan blades every few months with compressed air. The double ball-bearing fan is lubricated for long life; if noise or vibration appears years later, replace the fan unit only.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?