NEMIX RAM 8GB DDR4 2933 CL21 1.20V 260-Pin SODIMM
- 8GB
- 260-Pin DDR4 SO-DIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
A 16 GB dual-channel DDR4 kit running at 2133 MHz with CL15 latency and 1.2 V operation
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 2133 MT/s with CL15 latency. It operates at the standard 1.20 V and uses the 260-pin form factor for unbuffered, non-ECC memory. The kit targets laptop, all-in-one, small-form-factor and NAS devices that accept standard DDR4 SO-DIMM upgrades.
The modules are non-ECC and unbuffered, matching the majority of consumer notebooks and compact systems. Systems that require registered or ECC memory cannot use this kit. Buyers needing error-correcting code or registered DIMMs should look at enterprise-grade memory instead.
The decisive specification is the DDR4 2133 (PC4-17000) speed grade combined with CL15 timing at 1.20 V. Verify that the target platform supports this exact speed and voltage before purchase; higher or lower DDR4 speeds may not be compatible.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
At 1.20 V the sticks draw the standard DDR4 voltage, so heat output is typical for this speed and density.
Yes, the kit is 260-pin DDR4 SO-DIMM; the system must accept that form factor and DDR4 memory.
The system will run all modules at the speed and timings of the slowest stick, so mixing is possible but overall performance drops to the lower spec.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?