NEMIX RAM 8GB DDR4 2933 CL21 1.20V 260-Pin SODIMM
- 8GB
- 260-Pin DDR4 SO-DIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
A 16 GB dual-channel DDR4 kit running at 2133 MHz with CL15 latency and 1.2 V operation
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 2133 MT/s with CL15 latency. It operates at the standard 1.20 V and uses the 260-pin form factor for unbuffered, non-ECC memory. The kit targets laptop, all-in-one, small-form-factor and NAS devices that accept standard DDR4 SO-DIMM upgrades.
The modules are non-ECC and unbuffered, matching the majority of consumer notebooks and compact systems. Systems that require registered or ECC memory cannot use this kit. Buyers needing error-correcting code or registered DIMMs should look at enterprise-grade memory instead.
The decisive specification is the DDR4 2133 (PC4-17000) speed grade combined with CL15 timing at 1.20 V. Verify that the target platform supports this exact speed and voltage before purchase; higher or lower DDR4 speeds may not be compatible.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
At 1.20 V the sticks draw the standard DDR4 voltage, so heat output is typical for this speed and density.
Yes, the kit is 260-pin DDR4 SO-DIMM; the system must accept that form factor and DDR4 memory.
The system will run all modules at the speed and timings of the slowest stick, so mixing is possible but overall performance drops to the lower spec.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?