NEMIX RAM 8GB DDR4 2933 CL21 1.20V 260-Pin SODIMM
- 8GB
- 260-Pin DDR4 SO-DIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A 16 GB dual-channel DDR4 kit running at 2133 MHz with CL15 latency and 1.2 V operation
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 2133 MT/s with CL15 latency. It operates at the standard 1.20 V and uses the 260-pin form factor for unbuffered, non-ECC memory. The kit targets laptop, all-in-one, small-form-factor and NAS devices that accept standard DDR4 SO-DIMM upgrades.
The modules are non-ECC and unbuffered, matching the majority of consumer notebooks and compact systems. Systems that require registered or ECC memory cannot use this kit. Buyers needing error-correcting code or registered DIMMs should look at enterprise-grade memory instead.
The decisive specification is the DDR4 2133 (PC4-17000) speed grade combined with CL15 timing at 1.20 V. Verify that the target platform supports this exact speed and voltage before purchase; higher or lower DDR4 speeds may not be compatible.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
At 1.20 V the sticks draw the standard DDR4 voltage, so heat output is typical for this speed and density.
Yes, the kit is 260-pin DDR4 SO-DIMM; the system must accept that form factor and DDR4 memory.
The system will run all modules at the speed and timings of the slowest stick, so mixing is possible but overall performance drops to the lower spec.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?