NEMIX RAM 8GB DDR4 2933 CL21 1.20V 260-Pin SODIMM
- 8GB
- 260-Pin DDR4 SO-DIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
NEMIX RAM
A 16 GB dual-channel DDR4 kit running at 2133 MHz with CL15 latency and 1.2 V operation
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR4 SODIMM modules rated at 2133 MT/s with CL15 latency. It operates at the standard 1.20 V and uses the 260-pin form factor for unbuffered, non-ECC memory. The kit targets laptop, all-in-one, small-form-factor and NAS devices that accept standard DDR4 SO-DIMM upgrades.
The modules are non-ECC and unbuffered, matching the majority of consumer notebooks and compact systems. Systems that require registered or ECC memory cannot use this kit. Buyers needing error-correcting code or registered DIMMs should look at enterprise-grade memory instead.
The decisive specification is the DDR4 2133 (PC4-17000) speed grade combined with CL15 timing at 1.20 V. Verify that the target platform supports this exact speed and voltage before purchase; higher or lower DDR4 speeds may not be compatible.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR4 NON-ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS17000-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
At 1.20 V the sticks draw the standard DDR4 voltage, so heat output is typical for this speed and density.
Yes, the kit is 260-pin DDR4 SO-DIMM; the system must accept that form factor and DDR4 memory.
The system will run all modules at the speed and timings of the slowest stick, so mixing is possible but overall performance drops to the lower spec.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?