Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR2 laptop memory modules with gold contacts

NEMIX RAM

NEMIX RAM 4GB (2x2GB) DDR2 667MHz PC2-5300 CL5 1.8V 200-Pin SODIMM Kit

SKU CH-BJBJ-BPB17

A 4 GB dual-channel DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • 4GB (2 x 2GB)
  • 2GB
  • 4GB dual-channel kit expands laptop capacity
  • DDR2 667MHz PC2-5300 matches legacy system specs
  • CL5 latency at 1.8V for stable operation
  • 200-pin SODIMM form factor fits older notebooks
  • Non-ECC unbuffered modules tested under load

DDR2 667MHz SODIMM kit

This NEMIX RAM kit provides 4GB of DDR2 memory across two 2GB modules. It runs at 667MHz with a CAS latency of CL5 and operates at 1.80V. The 200-pin SODIMM form factor is designed for laptop memory slots.

Non-ECC unbuffered laptop upgrade

The modules are unbuffered and non-ECC, matching the requirements of many older notebook platforms. Builders working with servers or workstations that require registered or error-correcting memory should look elsewhere.

200-pin DDR2 interface

The kit uses a 200-pin DDR2 SO-DIMM interface, which determines whether it will fit the target system. Verify that the laptop accepts DDR2 PC2-5300 modules before purchasing.

Priekšrocības

  • 4GB dual-channel kit expands laptop capacity
  • DDR2 667MHz PC2-5300 matches legacy system specs
  • CL5 latency at 1.8V for stable operation
  • 200-pin SODIMM form factor fits older notebooks
  • Non-ECC unbuffered modules tested under load

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Series 200-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR2 NON- ECC Unbuffered SODIMM Laptop Memory
Part NumberMS5300-228K2
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR2 Laptop PC Memory Compatible

Citas šī modeļa versijas

Vēl 3 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 200-pin DDR2 SODIMM modules, and what step is often missed?

Align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then verify both sticks are seated evenly.

What maintenance or replacement will this DDR2 667 kit need over time?

No routine maintenance is required; the unbuffered non-ECC modules have no heat spreader or moving parts, so they run until a stick fails.

What limit appears first during sustained workloads on these CL5 1.80 V modules?

The DDR2 667 speed and CL5 latency set the throughput ceiling, so bandwidth saturates before voltage or thermal limits become an issue.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.