NEMIX RAM 2GB DDR2 800MHz PC2-6400 CL6 1.8V SODIMM
- 2GB
- 200-Pin DDR2 SO-DIMM
NEMIX RAM
A 4 GB dual-channel DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation
Capacity 4GB (2 x 2GB)
This NEMIX RAM kit provides 4GB of DDR2 memory across two 2GB modules. It runs at 667MHz with a CAS latency of CL5 and operates at 1.80V. The 200-pin SODIMM form factor is designed for laptop memory slots.
The modules are unbuffered and non-ECC, matching the requirements of many older notebook platforms. Builders working with servers or workstations that require registered or error-correcting memory should look elsewhere.
The kit uses a 200-pin DDR2 SO-DIMM interface, which determines whether it will fit the target system. Verify that the laptop accepts DDR2 PC2-5300 modules before purchasing.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR2 Orignial Series 200-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR2 NON- ECC Unbuffered SODIMM Laptop Memory |
| Part Number | MS5300-228K2 |
| Capacity | 4GB (2 x 2GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR2 Laptop PC Memory Compatible |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
Align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then verify both sticks are seated evenly.
No routine maintenance is required; the unbuffered non-ECC modules have no heat spreader or moving parts, so they run until a stick fails.
The DDR2 667 speed and CL5 latency set the throughput ceiling, so bandwidth saturates before voltage or thermal limits become an issue.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?