Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR2 laptop memory modules with gold contacts

NEMIX RAM

NEMIX RAM 4GB (2x2GB) DDR2 667MHz PC2-5300 CL5 1.8V 200-Pin SODIMM Kit

SKU CH-BJBJ-BPB17

A 4 GB dual-channel DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • 4GB (2 x 2GB)
  • 2GB
  • 4GB dual-channel kit expands laptop capacity
  • DDR2 667MHz PC2-5300 matches legacy system specs
  • CL5 latency at 1.8V for stable operation
  • 200-pin SODIMM form factor fits older notebooks
  • Non-ECC unbuffered modules tested under load

DDR2 667MHz SODIMM kit

This NEMIX RAM kit provides 4GB of DDR2 memory across two 2GB modules. It runs at 667MHz with a CAS latency of CL5 and operates at 1.80V. The 200-pin SODIMM form factor is designed for laptop memory slots.

Non-ECC unbuffered laptop upgrade

The modules are unbuffered and non-ECC, matching the requirements of many older notebook platforms. Builders working with servers or workstations that require registered or error-correcting memory should look elsewhere.

200-pin DDR2 interface

The kit uses a 200-pin DDR2 SO-DIMM interface, which determines whether it will fit the target system. Verify that the laptop accepts DDR2 PC2-5300 modules before purchasing.

Pluspunten

  • 4GB dual-channel kit expands laptop capacity
  • DDR2 667MHz PC2-5300 matches legacy system specs
  • CL5 latency at 1.8V for stable operation
  • 200-pin SODIMM form factor fits older notebooks
  • Non-ECC unbuffered modules tested under load

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Series 200-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR2 NON- ECC Unbuffered SODIMM Laptop Memory
Part NumberMS5300-228K2
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR2 Laptop PC Memory Compatible

Andere versies van dit model

Nog 3 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 200-pin DDR2 SODIMM modules, and what step is often missed?

Align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then verify both sticks are seated evenly.

What maintenance or replacement will this DDR2 667 kit need over time?

No routine maintenance is required; the unbuffered non-ECC modules have no heat spreader or moving parts, so they run until a stick fails.

What limit appears first during sustained workloads on these CL5 1.80 V modules?

The DDR2 667 speed and CL5 latency set the throughput ceiling, so bandwidth saturates before voltage or thermal limits become an issue.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.