Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green DDR2 laptop memory modules with gold contacts

NEMIX RAM

NEMIX RAM 4GB (2x2GB) DDR2 667MHz PC2-5300 CL5 1.8V 200-Pin SODIMM Kit

SKU CH-BJBJ-BPB17

A 4 GB dual-channel DDR2 SODIMM kit running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • 4GB (2 x 2GB)
  • 2GB
  • 4GB dual-channel kit expands laptop capacity
  • DDR2 667MHz PC2-5300 matches legacy system specs
  • CL5 latency at 1.8V for stable operation
  • 200-pin SODIMM form factor fits older notebooks
  • Non-ECC unbuffered modules tested under load

DDR2 667MHz SODIMM kit

This NEMIX RAM kit provides 4GB of DDR2 memory across two 2GB modules. It runs at 667MHz with a CAS latency of CL5 and operates at 1.80V. The 200-pin SODIMM form factor is designed for laptop memory slots.

Non-ECC unbuffered laptop upgrade

The modules are unbuffered and non-ECC, matching the requirements of many older notebook platforms. Builders working with servers or workstations that require registered or error-correcting memory should look elsewhere.

200-pin DDR2 interface

The kit uses a 200-pin DDR2 SO-DIMM interface, which determines whether it will fit the target system. Verify that the laptop accepts DDR2 PC2-5300 modules before purchasing.

Pontos fortes

  • 4GB dual-channel kit expands laptop capacity
  • DDR2 667MHz PC2-5300 matches legacy system specs
  • CL5 latency at 1.8V for stable operation
  • 200-pin SODIMM form factor fits older notebooks
  • Non-ECC unbuffered modules tested under load

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Series 200-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR2 NON- ECC Unbuffered SODIMM Laptop Memory
Part NumberMS5300-228K2
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR2 Laptop PC Memory Compatible

Outras versões deste modelo

Mais 3 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

How do I install the 200-pin DDR2 SODIMM modules, and what step is often missed?

Align the notch on each 200-pin module with the slot key, press firmly until the side clips click, then verify both sticks are seated evenly.

What maintenance or replacement will this DDR2 667 kit need over time?

No routine maintenance is required; the unbuffered non-ECC modules have no heat spreader or moving parts, so they run until a stick fails.

What limit appears first during sustained workloads on these CL5 1.80 V modules?

The DDR2 667 speed and CL5 latency set the throughput ceiling, so bandwidth saturates before voltage or thermal limits become an issue.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.