BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
64 GB kit of four 16 GB DDR4 ECC UDIMMs running at 2400 MHz with CL17 latency and 1.2 V operation
This 64GB kit contains four 16GB DDR4 2400MHz modules built with ECC error correction and an unbuffered design. It targets administrators upgrading compatible servers or workstations that require registered-free memory at PC4-19200 speed. The modules operate at a standard 1.2V and carry a CAS latency of 17 for stable operation.
Each stick uses a 2Rx8 organisation assembled from major OEM Samsung, Micron or Hynix components on a 288-pin UDIMM PCB. The unbuffered layout means the modules plug directly into standard DDR4 slots without a register chip, simplifying installation in platforms that support ECC unbuffered memory. Gold-edge contacts resist oxidation during long service cycles.
Before ordering, verify that your motherboard or system accepts DDR4 2400MHz ECC UDIMM modules and can populate four slots with a 2Rx8 configuration. Confirm the platform does not require registered or load-reduced DIMMs, which are electrically incompatible. Ensure the BIOS can initialise the full 64GB capacity at the rated speed and latency.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: ME19200-628K4-SM-SYS-5019S-L |
| Part Number | Part#: ME19200-628K4-SM-SYS-5019S-L |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | 17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Each module is rated for 2400 MT/s and PC4-19200, the industry designation for that speed grade; real-world throughput depends on the platform's memory controller.
The kit uses standard 288-pin DDR4 UDIMM form factor, so it fits any server or workstation board that accepts unbuffered ECC DDR4 DIMMs.
Populate the slots in the order shown in the motherboard manual — usually one per channel first — and press each DIMM down until both side clips click; the common mistake is stopping before the clips latch fully.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?