Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR4 ECC UDIMM sticks in silver static bags

NEMIX RAM

NEMIX RAM 64GB (4 x 16GB) DDR4 2400MHz PC4-19200 2Rx8 1.2V 288-PIN ECC UDIMM Unbuffered server RAM

SKU CH-52QJ-WR1B7

64 GB kit of four 16 GB DDR4 ECC UDIMMs running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS Latency17
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 MT/s speed rated at PC4-19200
  • ECC protection detects and corrects single-bit errors
  • Low 1.2 V operation reduces server power draw
  • Unbuffered 288-pin UDIMM with 2Rx8 organisation

64GB ECC UDIMM kit for servers

This 64GB kit contains four 16GB DDR4 2400MHz modules built with ECC error correction and an unbuffered design. It targets administrators upgrading compatible servers or workstations that require registered-free memory at PC4-19200 speed. The modules operate at a standard 1.2V and carry a CAS latency of 17 for stable operation.

288-pin dual-rank build quality

Each stick uses a 2Rx8 organisation assembled from major OEM Samsung, Micron or Hynix components on a 288-pin UDIMM PCB. The unbuffered layout means the modules plug directly into standard DDR4 slots without a register chip, simplifying installation in platforms that support ECC unbuffered memory. Gold-edge contacts resist oxidation during long service cycles.

Check DDR4 ECC unbuffered support

Before ordering, verify that your motherboard or system accepts DDR4 2400MHz ECC UDIMM modules and can populate four slots with a 2Rx8 configuration. Confirm the platform does not require registered or load-reduced DIMMs, which are electrically incompatible. Ensure the BIOS can initialise the full 64GB capacity at the rated speed and latency.

Kohokohdat

  • 64 GB total capacity from four 16 GB modules
  • DDR4 2400 MT/s speed rated at PC4-19200
  • ECC protection detects and corrects single-bit errors
  • Low 1.2 V operation reduces server power draw
  • Unbuffered 288-pin UDIMM with 2Rx8 organisation

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: ME19200-628K4-SM-SYS-5019S-L
Part NumberPart#: ME19200-628K4-SM-SYS-5019S-L
Capacity64GB (4 x 16GB)
SpeedDDR4 2400 (PC4 19200)
CAS Latency17
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

What does the DDR4 2400 PC4-19200 rating mean for actual bandwidth?

Each module is rated for 2400 MT/s and PC4-19200, the industry designation for that speed grade; real-world throughput depends on the platform's memory controller.

Will these 288-pin ECC UDIMMs fit my server's DIMM slots?

The kit uses standard 288-pin DDR4 UDIMM form factor, so it fits any server or workstation board that accepts unbuffered ECC DDR4 DIMMs.

What is the correct way to install the four 16 GB sticks, and what step is often missed?

Populate the slots in the order shown in the motherboard manual — usually one per channel first — and press each DIMM down until both side clips click; the common mistake is stopping before the clips latch fully.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.